If you own a car that uses keys to start it, you’ve probably faced the problem of having a broken ignition key at some point. Having an ignition key break can be inconvenient, especially if you don’t have access to another key in order to drive your car. However, there are several ways that you can get around this problem and drive your car again. There are different methods for dealing with broken ignition keys, depending on the situation. This article explores various ways to get a broken key out of the ignition so that you can drive your car again.
How To Get A Broken Key Out Of The Ignition?
1. Use a Socket Wrench
If you have a car with an automatic transmission, then you’re probably familiar with how the ignition key works. The ignition key is used to shift the transmission from park to drive and reverse. You can use a socket wrench to open up the lock cylinder so that you can remove your broken key.
2. Use a Flat-Head Screwdriver
Another way that you can get a broken ignition key out of the ignition is by using a flat-head screwdriver. To do this, all you need to do is insert the screwdriver into the hole that contains the old key and manually turn it around until it comes out of its slot (this should be easy). Once your screwdriver is removed, you can then slide it into place so that it fits securely in its original position. Once this is done, place your new key in its slot and turn it around until it locks into place. When this happens, your car will start up again. If, for some reason, your car does not start up with your new key, try inserting another one in its slot and turning it around until it locks into place again. This should restart your car’s engine. It’s important to note that this method will only work if you have an automatic transmission because most manual transmissions require keys for each gear shift as opposed to just one for all gears.
3. Use a Jumper Wire
If you have a manual transmission, you might be able to use a jumper wire to remove the old key from the ignition. The idea here is that your car’s existing electrical system will provide power to your new ignition key once you insert it into its slot. In order for this to work, all you need to do is jump the positive wire on your old key onto the positive terminal (the one with a red stripe) of your new ignition key. Once this is done, place your new ignition key into its slot and turn it around until it locks into place. Your car should now start up normally.
4. Use a Battery Charger
If you don’t want to risk damaging your car’s electrical system by using jumper wires or if you don’t have access to another ignition key in order to drive your car, then try using a battery charger instead. All you need for this method is an automotive battery charger and an old broken ignition key (you can use one that was removed from another vehicle). Turn on the battery charger and connect it in parallel with the positive terminal of your old broken ignition key (this will be indicated by either two flat-head terminals or two round ones). Now turn on the engine of your car and turn on the headlights so that they illuminate as much as possible while still allowing you enough room inside of them so that they are not blinding when driving at night. Next, turn your car over until it is in the park and then turn off the lights. Then, insert your new ignition key into its slot and turn it around until it locks into place. Once this happens, you should be able to start up your car again with the battery charger attached.
5. Use a Battery Charger with a Jumper Wire
If you don’t have access to a battery charger or if you don’t know how to use one, then try using a jumper wire instead. The idea here is that your car’s existing electrical system will provide power to your new ignition key once you insert it into its slot. In order for this to work, all you need to do is jump the positive wire on your old broken ignition key onto the positive terminal (the one with a red stripe) of your new ignition key. Once this is done, place your new ignition key in its slot and turn it around until it locks into place. Your car should now start up normally.
Remove The Broken Key From The Ignition.
- To remove a broken key from the ignition, it is best to use a flat-blade screwdriver. Turn the key in one direction until it doesn’t turn anymore. Pull the key out of the ignition.
- If you have an older car, you may not have a flat-blade screwdriver available to use for removing the broken key from the ignition. However, you can still get your broken key out of your car by using a small tool that has two hooks on it. Insert one hook into the hole where your old ignition key used to be and place another hook on top of that hole so that it presses against the side of which your new replacement key will fit. This method works because it prevents you from removing too much material from your new ignition key by trying to insert it at an angle and allows you to grip with just one hand while holding onto this tool with both hands.
- You can also try using something like a dollar bill or a paper clip to press against the side where your old ignition key used to be in order to prevent yourself from removing too much material at once when trying to insert your new replacement key into place. Inserting this kind of object into your car’s ignition should not require any special tools or skills, but if you are concerned about the safety and want even more assurance that this method will work, consider wrapping some tape around one end of this object in order for it to adhere more securely during insertion.
- If you’re worried about causing damage to your car by using a dollar bill or paper clip to remove the broken key from the ignition, there is another way that you can use these items in order to get your key out of your car without causing any damage. Insert a dollar bill into the hole where your old key used to be, and then use a pair of pliers to pull it out. This method should prevent you from damaging anything inside of the car while still allowing you to remove the broken key without having to use any special tools or techniques.
- If none of these methods work for removing your broken ignition key from the ignition, consider taking it into a mechanic shop and asking them for help removing it from the ignition by using their tools and techniques. The mechanics at a mechanic shop will be able to do this for you so that you can drive your car again as soon as possible.
Have A Locksmith Replace The Ignition Cylinder
- If you have a locksmith that can come to your home or office to replace the ignition cylinder, then this is the best way to get a broken key out of the ignition. Locksmiths can also be hired for more complicated situations.
- If you don’t have a locksmith nearby, there are several ways that you can get a broken key out of the ignition without having to hire someone else. One way is by using an automobile battery charger. A car battery charger can be used to power up the car’s battery so that it will start and run.
- Another method is by using an automotive jump starter like this one from Amazon. By using this jump starter, you can use your car’s battery as long as it has some charge in it so that you can drive your car again.
- Finally, if none of these methods work for getting your broken key out of the ignition, then you should just take your vehicle to a mechanic who specializes in automotive repairs for help with this problem (also check if there are any nearby auto repair shops). The mechanic will most likely be able to fix or replace your broken ignition key so that you can drive again after getting it repaired or replaced.
Use A Wire Hanger To Reach The Key.
● If you have a broken key that has gotten jammed in the ignition, you can use a wire hanger to reach the key. The wire will be able to slide into the hole of the key and back out of it. The hanger will allow you to move the broken key back up into the ignition so that you can start your car again.
● If your car doesn’t have a wire hanger, you can use some dental floss or threading material to get the broken key out of your ignition. You’ll need to thread one end through the hole in order for it to slide into the keyhole and pull it out again. This method is effective if you don’t have a wire hanger or dental floss handy but want to drive your car again as soon as possible.
● If none of these methods work, there are several different tools that are sold online that will help you get a broken key out of your ignition without damaging it any further. You can purchase these tools online at places like Walmart and dollar stores which sell them for very cheap prices compared to other brands of tools which cost around $20-$30 each! These tools include:
● If you have a broken ignition key that is stuck in your car’s ignition and you don’t have any of these tools, you can use a screwdriver to get the broken key out of your car. You will need to make sure that the tip of the screwdriver is covered in a thick layer of grease so that it doesn’t scratch or damage the key when you remove it from your ignition. You’ll also need to turn off your car before removing the key so that you don’t accidentally start it when you’re trying to get it out!
Conclusion
Getting a broken key out of the ignition can be frustrating. If you’re unable to remove the broken key yourself, you can ask for help from another person or service. Luckily, there are several ways to remove a broken key from the ignition, so you can get back on the road again.
